Tile and Marble Cleaning

Our IICRC Master Cleaning provides the expertise needed to clean and restore today's hard surfaces. Many times your natural stone (such as marble and granite), ceramic, VCT (vinyl composite tile), wood, laminate and concrete look better than new when we've completed our restorative cleaning and sealing.

Natural stone that has been expertly polished and finished can be one of the most beautiful surfaces available. We'll inspect your stone and recommend the service level required to bring it to its full potential. In many cases a honing, polishing, cleaning and sealing service is all that's required to produce fantastic results.

We use a terrific new technique and tools to clean grout and ceramics such as porcelain, quarry tile, Terra-cotta and Saltillo. Concrete also responds favorably to this treatment: pre-vacuuming, pre-spotting, pre-spraying is followed by a truckmounted hot water extraction rinse using a special hard surface extraction tool. We strongly recommend grout sealing to help preserve the integrity of your newly cleaned tile and grout.

Vinyl composite tile (VCT) that has been vacuumed, stripped, cleaned, rinsed and finished ("waxed") by our staff often appears so vibrant that a person needs sun glasses to inspect after the finish! The clean, deep shine we create with multiple coats of finish ("wax") can be stunning!

The same is true regarding our wood and laminate restoration results. After thorough dry soil removal, we gently mechanically scrub a neutral wood floor cleaner onto your floors until we've remove all soiling. We use colored wood fillers to repair deep gouges and scratches. We then apply a urethane finish that, especially after multiple coats, looks fantastic!